Monday, March 28, 2011

Prelim 1/350th TOS Enterprise Parts.

While this ship is still being textured and unfolded into a final form, I wanted to get up some preliminary parts for those who choose to give pre-assembly a try.
These parts are not fully textured, nor are they final parts, however, if you feel you have some valued feedback, I'm open to hearing what you have to say with regards to color, texture, unfolding, corrections..etc...









Sunday, March 27, 2011

Briefing Room Table, Computer, Monitor...

Below are some Briefingroom components. More to come.



Sunday, March 20, 2011

47" TOS Preliminary Parts Build Phase I

I've printed up some of the selected parts of the 47" Cardstock Enterprise in
order to check some of the parts for needed corrections and to check the accuracy
of the parts with relationship to each other. I've already built the bridge and
BC deck previously and today I'm focusing on the nacelle and it's associated components.

I'm looking into hosting and will be hosting all of these models in .pdf format,
after I get all of the kinks worked out and a list of corrections that need to be made.

I took the original templates and laid them out and began by cutting them to fit. As you can see below, the nacelle body for the 47" ship took up three standard 8.5 X 11" sheets of cardstock and the inner nacelle detail took up two sheets. After I cut the main body parts to fit I aligned them and taped them together and cut out the notch for the inner detail. I did this to use this part as a template to use poster-board to create the actual part.

I noticed that the shape of the inner nacelle detail didn't lend itself to proper construction, so I printed up two halves of the same side in order to come up with an accurate template for a single piece.

Later I'll show how to cut out the templates from poster-board to creat a whole without seems and will show how to add formers and strengtheners to the inside.















Never let anyone shut you down, or stop you from persuing your dreams. Remember, your only limitations lay within your own mind and lack of skill and both of those
things can be fixed by trying and working hard to overcome your limitations. Don't buy into the hype of those who are less talented, or less skilled than yourself. For that matter don't listen to those who speak with authority, but have their own reasons for discouraging you. Keep on Trekkin! =/\=

Friday, March 18, 2011

Transporter Room Monitor.

Part III of the TOS Transporter Room Equpment.



Below are some of the items that are currently "On the Bench."








Tuesday, March 15, 2011

47" TOS Enterprise Card Model WIP. =A=




Update. Still working on the TOS Enterprise, both versions.I have most of the textures done and am currently working on finishing the unwrap. Also, you can't have an Enterprise without a Doomsday Machine...









Here are some preliminary parts for the 47" Free Cardstock Enterprise! ;)=/\=

Monday, March 14, 2011

Briefing Room Monitor with screens.

Print page sized to fit the inside of page 2, after you choose which shot you like the best. Print page 2, 3 times for three different screens.








Tholian Web Spinner Ver. 1.0

Here's my take on a Tholian Web Spinner for your collection.






Version 2.0 Spinner



Simple Transporter Chamber 1.0

Greetings and Welcome. Below is a basic Transporter Chamber from The Original Trek!
Questions, suggestions and constructive feedback is always welcome! -/\-